How to find your engine's serial number
Your engine's serial number is unique to your engine. If the engine is stolen, the police and your insurer will ask for it. If you are buying a second-hand engine or boat, it is one of the first things to check. It takes five minutes to find, and it is a key piece of information you should have on record.
1. Know which number you're looking for
Engine plates show more than one number, and they are easy to mix up.
- The model or model code says what type of engine it is. Thousands of engines share it.
- The serial number is unique to your engine. This is the one you want.
Some plates show other numbers too, such as a year or a product code. If you're not sure which is which, look for the words "Serial", "Serial No." or "S/N" next to the number.
2. Outboards: look on the transom bracket
On most outboards the serial number is on a metal plate or label on the transom bracket, also called the clamp or swivel bracket. This is the part that clamps the engine to the back of the boat. Here is what the makers and dealers say for the main brands:
- Yamaha: a small metal plate on the clamp bracket, usually the port (left) side. Some models also have a second label on the middle of the engine.
- Mercury: a label on the transom bracket. The serial number is a number, a letter and six more numbers, such as 0G112233.
- Honda: a metal plate on or near the stern bracket. The number is in the form BXXX-XXXXXXX.
- Suzuki and Tohatsu: usually on the side of the transom bracket.
- Evinrude and Johnson: a plate or label near the mounting bracket.
The exact spot changes with the model and the year. If you can't find it, your owner's manual will show you.
3. Inboards and sterndrives: look on the engine
- Look for a plate or label on the side of the engine, or on top of the flame arrester cover.
- Volvo Penta: the serial number is on a plate and usually on a decal too. Where they are depends on the model, so check your manual. The product number and serial number are different, so make sure you copy the serial number.
- Yanmar: the engine information plate.
- A sterndrive may have its own serial number as well as the engine. Write down both.
4. If you can't read it
- Wipe the plate gently with a damp cloth. They get covered in grime and salt.
- Use a torch from the side, and zoom in with your phone camera. A photo is often easier to read than the plate itself.
- Don't scrape or scratch it. A damaged plate can cause problems later.
- If it is missing or too corroded, look at the receipt, the warranty card or the owner's manual. A dealer for your engine's make may also be able to help.
5. Write it down and take a photo
- Photograph the plate, close up and in focus, and a wider shot of the engine on the boat.
- Save the serial number, with the make, model and horsepower, somewhere you can get at it from your phone.
- BoatID asks for the serial number and a photo when you register an engine, so they are kept with your boat and trailer details.
- If you bought the engine from a dealer, the serial number should also be on your receipt. Check it matches the plate, and keep the receipt safe.
- Tell your insurer, if they don't already have it.
If you're buying
The serial number on the engine should match the paperwork and the advert. If the plate is missing, looks scratched, or doesn't match, ask why. If the answer isn't convincing, walk away. Our guide to checking a boat before you buy it has more information on this.
This is general guidance. The exact place varies by model and year, so check your owner's manual.
Own a boat, engine or trailer?
Give it a BoatID of its own. It's free and takes about five minutes.
Register yours — free